SteppIR Antennas   Tel: 425.453.1910 Fax: 425.462.4415
2112 116th Ave NE Suite 1-5   sales@steppir.com
Bellevue, WA 98004
   
    Quantity / Selection Unit Price (USD)
0500X SteppIR T-Shirt
T-Shirt. Dark Blue, with Color SteppIR Logo. Choose M, L, XL, XXL, or XXXL size in next step
$ 17.00
SDA 100 Controller - at purchase
SDA 100 Antenna controller, manual tune; Basic controller, no options included; This is now the standard controller included for all SteppIR Antenna purchases; To order this controller as a standalone product, please see the accessories order form;
$ 0.00
01321 Transceiver Interface Module - SDA100
Optional module; **FOR SDA100 MODEL CONTROLLERS ONLY** Installed inside the SDA100 controller, allows the antenna to automatically tune when transceiver changes frequency; Works with most modern transceivers; Requires interface cable;
$ 99.00
01322 Tuning Relay (transceiver lock out)
Tuning relay prohibits the transceiver from transmitting while the antenna is tuning; This optional module is installed inside the SDA 100 controller; Cable not included
$ 99.00
01323 Advanced Lightning Protection (ALP) Module (Upgrade Option)
This module installs inside the SDA 100 controller and protects the sensitive electronics via disconnect with relays when not in use; Effectively disconnects the control wires from the controller; Will not protect while the antenna is adjusting; (option available with antenna or controller purchase only)
$ 185.00
01324 Remote Driver Board Kit (1-4 Elements)
The remote driver board allows the user to run control cable from the antenna to the bottom of the tower, and then run cat5 cable up to 900 feet from the remote driver board to the ham shack; This standalone module also has the Advanced Lightning Protection (ALP) module built into it; Must have power available at tower; Ideal for long distances from antenna to controller location.
$ 299.00
02101 Transceiver Interface Cable - ICOM
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface); ALL cables are the same for Icom; Cable S01
$ 25.00
Transceiver Interface Cable - Yaesu
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface) Yaesu uses either the S12, S13, S18 or S19 cable, you can select specific rig on the next page      of order form;
$ 25.00
  00711 Upgrade kit for existing antenna, 4E Yagi conversion to 40/30 loop dipole
This upgrade replaces the existing driven element for the 20m-6m yagi to create a dipole for 40m and 30m; It is offered for customers that have a 20m-6m Yagi already and want to replace the existing driven element with the 40/30 loop. 

* May require new firmware chip and/or Element Return Bracket (each sold separately)
$ 665.00
Transceiver Interface Cable - KENWOOD
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface); Kenwood takes either the S12, S15 or S18 cable, you can select specific rig on the next page of order form;
$ 25.00
Transceiver Interface Cable - OTHER MODELS
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface) Cable types for these radios vary, you can select specific rig on the next page of order form;
$ 25.00
02114 Y Connector for SDA 100 Transceiver Interface
''Y'' cable is used to connect a computer logging program, transceiver and the SDA 100 to one singular communication port; The Y cable is not necessary with Icom Radios; Must be used with Transceiver Interface Module and radio-specific Interface Cable (each sold separately).
$ 46.00
03650 25 pin Cable End Solderless Connector
Controller cable splice; 25 pin dsub to 25 slot terminal strip header; use with control cable to connect cable to the electronic controller (SDA100 or Original)
$ 25.00
00204 4 Element Yagi 20m-6m
4 element Yagi, 20m-6m continuous coverage; 36 ft longest element, 24.1 ft turning radius, 9.7 sq ft wind load, 99 lb; SDA 100 controller included;
$ 2995.00
01411 40/30 Dipole Upgrade Option at purchase - 4 ELEMENT YAGI
This upgrade replaces the driven element for the 20m-6m yagi to create a dipole for 40m and 30m, while maintaining four elements on 20m-6m; Element length 39 feet, turning radius stays the same, weight increases to 106 lb, wind load increases to 11.7 sq ft; Pricing available only at purchase, for upgrade after purchase please see the accessories order form
$ 460.00
01101 33v Power Supply Upgrade
Upgrade option with antenna purchase - 
33v power supply is needed to replace supplied 24v power supply for cable lengths over 200 ft (200 feet is fine with 24v supply); For replacement of existing power supply, price is $75.00 (PN 09002)
$ 50.00
01602 Truss kit for 30/40 Dipole Loop - 4 Element Yagi
Element truss for loop element; Helps to level the loops for a better appearance; DOES NOT improve wind or ice load limits.
$ 114.00
03322 16 conductor control cable, priced by foot
16 conductor control cable, priced by the foot, no connectors; 22 AWG shielded; (For making a control cable with a connector for the SDA100 controller, be sure to also order 25 pin splice connector #03650)
$ 1.10
06004 6m Passive Element - 4 Element Yagi
Two aluminum fixed length passive elements create a nicely spaced 6 el yagi on 6m band (50.000-50.300 Mhz); Improves performance to 13.0 dBi gain / 30dB front-to-rear;
$ 198.00
  01502 Connector Junction Box - 4 EL, DB36
Connector junction box allows the creation of individual plug ins from control cable to each element housing unit (EHU); Enclosed in a hinged, weatherproof box that mounts on the mast plate; includes 25 pin female connection for testing of antenna at installation site; GREATLY reduces chances for miswiring of antenna; Highly recommended for existing antennas;
$ 215.00
  06116 Line Filter / Voltage Suppressor 16 WIRE
Line filter (16 wire) for filtering ESD and other unwanted voltages from the control cable; Manufactured by Array Solutions;
$ 135.00
99999 Can't find a part? Hand enter what you want!
Instructions for use: Select qty 1 in the box next to this text (column to right). Select any other items you wish to order on page one of this order form. Move to page two, where you will be prompted to enter in a message for part 99999. We will see this message when the order is submitted. $0.01 price is shown due to technical limitations.
$ 0.01
05015 SteppIR Baseball Cap
6 panel low profile brushed cotton baseball cap; Sandwich style, navy blue on tan; Embroidered SteppIR logo in white and red; A great looking cap!
$ 17.00
SteppIR Premium Polo Shirt
Navy blue polo style shirt; Embroidered SteppIR logo. These are high quality shirts! Available in Large, XL and 2XL sizes. You will be asked to select a size on the next page of the order form. 05011-M 05012-L 05013-XL 05014-XXL
$ 25.00
Select your method of payment: