SteppIR Antennas

SteppIR Antennas   Tel: 425.453.1910 Fax: 425.462.4415
2112 116th Ave NE Suite 1-5   sales@steppir.com
Bellevue, WA 98004
   
    Quantity / Selection Unit Price (USD)
SDA 100 Controller - at purchase
SDA 100 Antenna controller, manual tune; Basic controller, no options included; This is now the standard controller included for all SteppIR Antenna purchases; To order this controller as a standalone product, please see the accessories order form;
$ 0.00
00418 UrbanBeam
UrbanBeam 40-6 m Yagi. 2 element beam 20-6, rotatable dipole 40/30.
$ 1769.00
03222 12 conductor control cable, priced by the foot
12 conductor control cable, priced by the foot, no connectors; 22 AWG shielded; (For making a control cable with a connector for the SDA100 controller, be sure to also order 25 pin splice connector #03650)
$ 0.72
01501 Connector Junction Box - 2 Element, 3 Element, and UrbanBeam Yagi
Connector junction box allows the creation of individual plug ins from control cable to each element housing unit (EHU); Enclosed in a hinged, weatherproof box that mounts on the mast plate; includes 25 pin female connection for testing of antenna at installation site; GREATLY reduces chances for miswiring of antenna; Highly recommended;
$ 185.00
01321 Transceiver Interface Module - SDA100
Optional module; **FOR SDA100 MODEL CONTROLLERS ONLY** Installed inside the SDA100 controller, allows the antenna to automatically tune when transceiver changes frequency; Works with most modern transceivers; Requires interface cable;
$ 99.00
01322 Tuning Relay (transceiver lock out)
Tuning relay prohibits the transceiver from transmitting while the antenna is tuning; This optional module is installed inside the SDA 100 controller; Cable not included
$ 99.00
01323 Advanced Lightning Protection (ALP) Module (Upgrade Option)
This module installs inside the SDA 100 controller and protects the sensitive electronics via disconnect with relays when not in use; Effectively disconnects the control wires from the controller; Will not protect while the antenna is adjusting; (option available with antenna or controller purchase only)
$ 185.00
06112 Line Filter / Voltage Suppressor - 2 and 3 ELEMENT
Line filter (12 wire) for filtering ESD and other unwanted voltages from the control cable; Manufactured by Array Solutions
$ 116.00
01324 Remote Driver Board Kit (1-4 Elements)
The remote driver board allows the user to run control cable from the antenna to the bottom of the tower, and then run cat5 cable up to 900 feet from the remote driver board to the ham shack; This standalone module also has the Advanced Lightning Protection (ALP) module built into it; Must have power available at tower; Ideal for long distances from antenna to controller location.
$ 299.00
02101 Transceiver Interface Cable - ICOM
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface); ALL cables are the same for Icom; Cable S01
$ 25.00
Transceiver Interface Cable - Yaesu
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface) Yaesu uses either the S12, S13, S18 or S19 cable, you can select specific rig on the next page      of order form;
$ 25.00
Transceiver Interface Cable - KENWOOD
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface); Kenwood takes either the S12, S15 or S18 cable, you can select specific rig on the next page of order form;
$ 25.00
Transceiver Interface Cable - OTHER MODELS
Connects your transceiver to the SDA 100 controller for automatic adjustment of antenna when you change frequencies (requires 01321 transceiver interface) Cable types for these radios vary, you can select specific rig on the next page of order form;
$ 25.00
02114 Y Connector for SDA 100 Transceiver Interface
''Y'' cable is used to connect a computer logging program, transceiver and the SDA 100 to one singular communication port; The Y cable is not necessary with Icom Radios; Must be used with Transceiver Interface Module and radio-specific Interface Cable (each sold separately).
$ 46.00
03650 25 pin Cable End Solderless Connector
Controller cable splice; 25 pin dsub to 25 slot terminal strip header; use with control cable to connect cable to the electronic controller (SDA100 or Original)
$ 25.00
0500X SteppIR T-Shirt
T-Shirt. Dark Blue, with Color SteppIR Logo. Choose M, L, XL, XXL, or XXXL size in next step
$ 17.00
05015 SteppIR Baseball Cap
6 panel low profile brushed cotton baseball cap; Sandwich style, navy blue on tan; Embroidered SteppIR logo in white and red; A great looking cap!
$ 17.00
SteppIR Premium Polo Shirt
Navy blue polo style shirt; Embroidered SteppIR logo. These are high quality shirts! Available in Large, XL and 2XL sizes. You will be asked to select a size on the next page of the order form. 05011-M 05012-L 05013-XL 05014-XXL
$ 25.00
Select your method of payment: